FTP server vsftpd

Тема в разделе "Десктопный Linux", создана пользователем ODYBAH4UK, 21 май 2009.

Статус темы:
Закрыта.
Модераторы: Цукер
  1. ODYBAH4UK

    ODYBAH4UK Постоялец

    Регистр.:
    18 апр 2009
    Сообщения:
    95
    Симпатии:
    8
    Ребят помогите настроить ftp сервак под Linux ubuntu

    vsftpd

    хочу сделать вход для ананимных пользователей + сделать одного пользователя админа для заливки файлов со всеми провами

    вот мой conf

    HTML:
    # Example config file /etc/vsftpd.conf
    #
    # The default compiled in settings are fairly paranoid. This sample file
    # loosens things up a bit, to make the ftp daemon more usable.
    # Please see vsftpd.conf.5 for all compiled in defaults.
    #
    # READ THIS: This example file is NOT an exhaustive list of vsftpd options.
    # Please read the vsftpd.conf.5 manual page to get a full idea of vsftpd's
    # capabilities.
    #
    #
    # Run standalone?  vsftpd can run either from an inetd or as a standalone
    # daemon started from an initscript.
    listen=YES
    #
    # Run standalone with IPv6?
    # Like the listen parameter, except vsftpd will listen on an IPv6 socket
    # instead of an IPv4 one. This parameter and the listen parameter are mutually
    # exclusive.
    #listen_ipv6=YES
    #
    # Allow anonymous FTP? (Beware - allowed by default if you comment this out).
    anonymous_enable=YES
    #
    # Uncomment this to allow local users to log in.
    local_enable=YES
    #
    # Uncomment this to enable any form of FTP write command.
    write_enable=YES
    #
    # Default umask for local users is 077. You may wish to change this to 022,
    # if your users expect that (022 is used by most other ftpd's)
    local_umask=077
    #
    # Uncomment this to allow the anonymous FTP user to upload files. This only
    # has an effect if the above global write enable is activated. Also, you will
    # obviously need to create a directory writable by the FTP user.
    anon_upload_enable=YES
    #
    # Uncomment this if you want the anonymous FTP user to be able to create
    # new directories.
    anon_mkdir_write_enable=YES
    #
    # Activate directory messages - messages given to remote users when they
    # go into a certain directory.
    dirmessage_enable=YES
    #
    # Activate logging of uploads/downloads.
    xferlog_enable=YES
    #
    # Make sure PORT transfer connections originate from port 20 (ftp-data).
    connect_from_port_20=YES
    #
    # If you want, you can arrange for uploaded anonymous files to be owned by
    # a different user. Note! Using "root" for uploaded files is not
    # recommended!
    chown_uploads=YES
    chown_username=romashka
    #
    # You may override where the log file goes if you like. The default is shown
    # below.
    #
    # If you want, you can have your log file in standard ftpd xferlog format
    #xferlog_std_format=YES
    #
    # You may change the default value for timing out an idle session.
    idle_session_timeout=600
    #
    # You may change the default value for timing out a data connection.
    data_connection_timeout=120
    #
    # It is recommended that you define on your system a unique user which the
    # ftp server can use as a totally isolated and unprivileged user.
    #nopriv_user=ftpsecure
    #
    # Enable this and the server will recognise asynchronous ABOR requests. Not
    # recommended for security (the code is non-trivial). Not enabling it,
    # however, may confuse older FTP clients.
    #async_abor_enable=YES
    #
    # By default the server will pretend to allow ASCII mode but in fact ignore
    # the request. Turn on the below options to have the server actually do ASCII
    # mangling on files when in ASCII mode.
    # Beware that on some FTP servers, ASCII support allows a denial of service
    # attack (DoS) via the command "SIZE /big/file" in ASCII mode. vsftpd
    # predicted this attack and has always been safe, reporting the size of the
    # raw file.
    # ASCII mangling is a horrible feature of the protocol.
    ascii_upload_enable=NO
    ascii_download_enable=NO
    #
    # You may fully customise the login banner string:
    ftpd_banner=Добро пожаловать на Ogame FTP Warez.
    #
    # You may specify a file of disallowed anonymous e-mail addresses. Apparently
    # useful for combatting certain DoS attacks.
    #deny_email_enable=YES
    # (default follows)
    #banned_email_file=/etc/vsftpd.banned_emails
    #
    # You may restrict local users to their home directories.  See the FAQ for
    # the possible risks in this before using chroot_local_user or
    # chroot_list_enable below.
    #chroot_local_user=YES
    #
    # You may specify an explicit list of local users to chroot() to their home
    # directory. If chroot_local_user is YES, then this list becomes a list of
    # users to NOT chroot().
    chroot_list_enable=YES
    # (default follows)
    #chroot_list_file=/etc/vsftpd.chroot_list
    #
    # You may activate the "-R" option to the builtin ls. This is disabled by
    # default to avoid remote users being able to cause excessive I/O on large
    # sites. However, some broken FTP clients such as "ncftp" and "mirror" assume
    # the presence of the "-R" option, so there is a strong case for enabling it.
    ls_recurse_enable=NO
    #
    #
    # Debian customization
    #
    # Some of vsftpd's settings don't fit the Debian filesystem layout by
    # default.  These settings are more Debian-friendly.
    #
    # This option should be the name of a directory which is empty.  Also, the
    # directory should not be writable by the ftp user. This directory is used
    # as a secure chroot() jail at times vsftpd does not require filesystem
    # access.
    secure_chroot_dir=/var/run/vsftpd
    #
    # This string is the name of the PAM service vsftpd will use.
    pam_service_name=vsftpd
    #
    # This option specifies the location of the RSA certificate to use for SSL
    # encrypted connections.
    rsa_cert_file=/etc/ssl/certs/ssl-cert-snakeoil.pem
    # This option specifies the location of the RSA key to use for SSL
    # encrypted connections.
    rsa_private_key_file=/etc/ssl/private/ssl-cert-snakeoil.key
    выручайте :thenks:
     
  2. Yulo

    Yulo Постоялец

    Регистр.:
    21 апр 2008
    Сообщения:
    133
    Симпатии:
    160
    У тебя стоит тут все что надо и загрузка/отгрузка файлов для анонимов и для пользователя romashka со всеми правами.
     
    dm11 и klarnet нравится это.
  3. ODYBAH4UK

    ODYBAH4UK Постоялец

    Регистр.:
    18 апр 2009
    Сообщения:
    95
    Симпатии:
    8
    Только вот при заходе требует вести логин и пороль :( как это исправить что бы не требовало? и я не понел в конфиге где указывается деректория самого FTP
     
  4. Yulo

    Yulo Постоялец

    Регистр.:
    21 апр 2008
    Сообщения:
    133
    Симпатии:
    160
    Если не хочешь чтоб анонимы что то загружали на сервер измени anon_upload_enable=NO и соответственно anon_mkdir_write_enable=NO

    Добавлено через 6 минут
    Впиши в /etc/vsftpd/user_list
    anonymous
    ftp
    romashka
     
    dm11 и klarnet нравится это.
  5. t0os

    t0os

    Регистр.:
    21 окт 2007
    Сообщения:
    284
    Симпатии:
    36
    А почему proftpd не хотите поставить? В настройке прост и есть не просит.
     
  6. ODYBAH4UK

    ODYBAH4UK Постоялец

    Регистр.:
    18 апр 2009
    Сообщения:
    95
    Симпатии:
    8
    Выложи тогда пожалуйста

    полный ман по proftp

    по настройке его и всего его мелкие детали :)
     
  7. AccessForbidden

    AccessForbidden

    Регистр.:
    5 янв 2009
    Сообщения:
    324
    Симпатии:
    57
Статус темы:
Закрыта.