Webalizer — распространяется под лицензией GPL, на основе логфайлов веб-сервера генерирует HTML-страницы со статистикой о работе веб-сайта. Создан Братфордом Л. Барретом в 1997 году. Статистические данные, генерируемые Вебалайзером, включают в себя количество запросов, посещений, ссылающиеся страницы, страны посетитилей, количество подгруженных данных и другую информацию. Скрипт гибко настраивается конфой, работает прозрачно и крайне неприхотлив в отношении ресурсов. Скрипт сбора статистики вешается на крон - можно анализировать раз в сутки, можно - каждые 10 минут. В общем, в качестве бесплатной и стабильной системы анализа логов - ИМХО, самое то. А вот Majordomo, кстати, за его включение берет 30 рублей в месяц ) и смех, и грех. Добавлено через 2 минуты А вот пример конфы - для того чтобы вкурить перед началом осознанного ковыряния, а также - для обмена хаками и опытом ;-) HTML: [antonio@othal /usr/home/antonio/forum.istorichka.ru]$ cat ./webalizer.conf # # Sample Webalizer configuration file # Copyright 1997-2009 by Bradford L. Barrett # # Distributed under the GNU General Public License. See the # files "Copyright" and "COPYING" provided with the webalizer # distribution for additional information. # # This is a sample configuration file for the Webalizer (ver 2.20) # Lines starting with pound signs '#' are comment lines and are # ignored. Blank lines are skipped as well. Other lines are considered # as configuration lines, and have the form "ConfigOption Value" where # ConfigOption is a valid configuration keyword, and Value is the value # to assign that configuration option. Invalid keyword/values are # ignored, with appropriate warnings being displayed. There must be # at least one space or tab between the keyword and its value. # # As of version 0.98, The Webalizer will look for a 'default' configuration # file named "webalizer.conf" in the current directory, and if not found # there, will look for "/etc/webalizer.conf". # LogFile defines the web server log file to use. If not specified # here or on on the command line, input will default to STDIN. If # the log filename ends in '.gz' (a gzip compressed file), or '.bz2' # (bzip2 compressed file), it will be decompressed on the fly as it # is being read. LogFile /vhosts/forum.istorichka.ru/logs/access.log # LogType defines the log type being processed. Normally, the Webalizer # expects a CLF or Combined web server log as input. Using this option, # you can process ftp logs (xferlog as produced by wu-ftp and others), # Squid native logs or W3C extended format web logs. Values can be 'clf', # 'ftp', 'squid' or 'w3c'. The default is 'clf'. LogType clf # OutputDir is where you want to put the output files. This should # should be a full path name, however relative ones might work as well. # If no output directory is specified, the current directory will be used. OutputDir /vhosts/forum.istorichka.ru/htdocs/wstat # HistoryName allows you to specify the name of the history file produced # by the Webalizer. The history file keeps the data for previous months, # and is used for generating the main HTML page (index.html). The default # is a file named "webalizer.hist", stored in the output directory being # used. The name can include a path, which will be relative to the output # directory unless absolute (starts with a leading '/'). HistoryName webalizer.hist # Incremental processing allows multiple partial log files to be used # instead of one huge one. Useful for large sites that have to rotate # their log files more than once a month. The Webalizer will save its # internal state before exiting, and restore it the next time run, in # order to continue processing where it left off. This mode also causes # The Webalizer to scan for and ignore duplicate records (records already # processed by a previous run). See the README file for additional # information. The value may be 'yes' or 'no', with a default of 'no'. # The file 'webalizer.current' is used to store the current state data, # and is located in the output directory of the program (unless changed # with the IncrementalName option below). Please read at least the section # on Incremental processing in the README file before you enable this option. Incremental yes # IncrementalName allows you to specify the filename for saving the # incremental data in. It is similar to the HistoryName option where the # name is relative to the specified output directory, unless an absolute # filename is specified. The default is a file named "webalizer.current" # kept in the normal output directory. If you don't specify "Incremental" # as 'yes' then this option has no meaning. IncrementalName webalizer.current # ReportTitle is the text to display as the title. The hostname # (unless blank) is appended to the end of this string (seperated with # a space) to generate the final full title string. # Default is (for english) "Usage Statistics for". ReportTitle Usage Statistics for # HostName defines the hostname for the report. This is used in # the title, and is prepended to the URL table items. This allows # clicking on URLs in the report to go to the proper location in # the event you are running the report on a 'virtual' web server, # or for a server different than the one the report resides on. # If not specified here, or on the command line, webalizer will # try to get the hostname via a uname system call. If that fails, # it will default to "localhost". HostName forum.istorichka.ru # HTMLExtension allows you to specify the filename extension to use # for generated HTML pages. Normally, this defaults to "html", but # can be changed for sites who need it (like for PHP embeded pages). HTMLExtension html # PageType lets you tell the Webalizer what types of URLs you # consider a 'page'. Most people consider html and cgi documents # as pages, while not images and audio files. If no types are # specified, defaults will be used ('htm*', 'cgi' and HTMLExtension # if different for web logs, 'txt' for ftp logs). PageType htm* PageType php* PageType doc PageType rtf PageType cgi PageType pl # PagePrefix allows all requests with a specified prefix to be # considered as 'pages'. If you want everything under /documents # to be treated as pages no matter what their extension is. Also # useful if you have cgi-scripts with PATH_INFO. PagePrefix /cgi-bin # OmitPage lets you tell the Webalizer that certain URLs do not # contain any pages. No URL matching an OmitPage value will be # counted as a page, even if it matches a PageType above or has # no extension (e.g., a directory). They will still be counted # as a hit. OmitPage /wstat # UseHTTPS should be used if the analysis is being run on a # secure server, and links to urls should use 'https://' instead # of the default 'http://'. If you need this, set it to 'yes'. # Default is 'no'. This only changes the behaviour of the 'Top # URLs' table. UseHTTPS no # HTAccess allows the generation of a default .htaccess file in the # output directory. If enabled, a default .htaccess file will be # created (with a single "DirectoryIndex" directive), unless one # already exists. Values may be 'yes' or 'no', with 'no' # being the default (don't write .htaccess files). HTAccess yes # StripCGI determines if URL CGI variables should be striped or not. # Historically, the Webalizer stripped all CGI variables from the end # of URLs to improve accuracy. Some sites may prefer to keep the CGI # variables in place, particularly those with highly dynamic pages. # Values may be 'yes' or 'no', with the default being 'yes'. StripCGI no # The TrimSquidURL option only has effect on squid type log files. # When analyzing a squid log, it is usually desirable to have less # granularity on the URLs. TrimSquidURL = n where n is a number > 0 # causes all URLs to be truncated after the nth '/' after the http:// # portion. Setting TrimSquidURL to one (1) will cause all URLs to be # summarized by domain only. The default is zero (0), which disables # any such truncation and preserve the URLs as they are in the log. TrimSquidURL 0 # DNSCache specifies the DNS cache filename to use for reverse DNS lookups. # This file must be specified if you wish to perform name lookups on any IP # addresses found in the log file. If an absolute path is not given as # part of the filename (ie: starts with a leading '/'), then the name is # relative to the default output directory. See the DNS.README file for # additional information. DNSCache dns_cache.db # DNSChildren allows you to specify how many "children" processes are # run to perform DNS lookups to create or update the DNS cache file. # If a number is specified, the DNS cache file will be created/updated # each time the Webalizer is run, immediately prior to normal processing, # by running the specified number of "children" processes to perform # DNS lookups. If used, the DNS cache filename MUST be specified as # well. The default value is zero (0), which disables DNS cache file # creation/updates at run time. The number of children processes to # run may be anywhere from 1 to 100, however a large number may effect # normal system operations. Reasonable values should be between 5 and # 20. See the DNS.README file for additional information. DNSChildren 10 # CacheIPs allows unresolved IP addresses to be cached in the DNS # database. Normally, only resolved addresses are saved. At some # sites, particularly those with a large number of unresolvable IP # addresses visiting, it may be useful to enable this feature so # those addresses are not constantly looked up each time the program # is run. Values can be 'yes' or 'no', with 'no' being the default. #CacheIPs no # CacheTTL specifies the time to live (TTL) value for cached DNS # entries, in days. This value may be anywhere between 1 and 100 # with the default being 7 days (1 week). CacheTTL 3 # The GeoDB option enables or disabled the use of the native # Webalizer GeoDB geolocation services. This is the preferred # geolocation option. Values may be 'yes' or 'no', with 'no' # being the default. #GeoDB no # GeoDBDatabase specifies an alternate database to use. The # default database is /usr/share/GeoDB/GeoDB.dat (however the # path may be changed at compile time; use the -vV command # line option to determine where). If a different database is # to be used, it may be specified here. The name is relative # to the output directory being used unless an absolute name # (ie: starts with a leading '/') is specified. #GeoDBDatabase /usr/share/GeoDB/geodb.dat # The GeoIP option enables or disables the use of geolocation # services provided by the GeoIP library (http://www.maxmind.com), # if available. Values may be 'yes' or 'no, with 'no' being the # default. Note: if GeoDB is enabled, then this option will have # no effect (GeoDB will be used regardless of this setting). #GeoIP yes # GeoIPDatabase specifies an alternate database filename to use by the # GeoIP library. If an absolute path is not given as part of the name # (ie: starts with a leading '/'), then the name is relative to the # default output directory. This option should not normally be needed. #GeoIPDatabase GeoIP.dat #GeoIPDatabase /usr/share/GeoIP/GeoIP.dat # HTMLPre defines HTML code to insert at the very beginning of the # file. Default is the DOCTYPE line shown below. Max line length # is 80 characters, so use multiple HTMLPre lines if you need more. HTMLPre <!DOCTYPE HTML PUBLIC "-//W3C//DTD HTML 4.0 Transitional//EN"> # HTMLHead defines HTML code to insert within the <HEAD></HEAD> # block, immediately after the <TITLE> line. Maximum line length # is 80 characters, so use multiple lines if needed. HTMLHead <meta http-equiv="Content-Type" content="text/html; charset=utf-8" /> HTMLHead <META NAME="author" CONTENT="The Webalizer"> HTMLHead <META NAME="ROBOTS" CONTENT="NOINDEX, NOFOLLOW"> # HTMLBody defined the HTML code to be inserted, starting with the # <BODY> tag. If not specified, the default is shown below. If # used, you MUST include your own <BODY> tag as the first line. # Maximum line length is 80 char, use multiple lines if needed. HTMLBody <BODY BGCOLOR="#E8E8E8" TEXT="#000000" LINK="#0000FF" VLINK="#FF0000"> # HTMLPost defines the HTML code to insert immediately before the # first <HR> on the document, which is just after the title and # "summary period"-"Generated on:" lines. If anything, this should # be used to clean up in case an image was inserted with HTMLBody. # As with HTMLHead, you can define as many of these as you want and # they will be inserted in the output stream in order of apperance. # Max string size is 80 characters. Use multiple lines if you need to. HTMLPost <BR CLEAR="all" /> # HTMLTail defines the HTML code to insert at the bottom of each # HTML document, usually to include a link back to your home # page or insert a small graphic. It is inserted as a table # data element (ie: <TD> your code here </TD>) and is right # alligned with the page. Max string size is 80 characters. HTMLTail othal.net # HTMLEnd defines the HTML code to add at the very end of the # generated files. It defaults to what is shown below. If # used, you MUST specify the </BODY> and </HTML> closing tags # as the last lines. Max string length is 80 characters. HTMLEnd </BODY></HTML> # The LinkReferrer option determines if entries in the referrer table # should be plain text or a HTML link to the referrer. Values can be # either 'yes' or 'no', with 'no' being the default. LinkReferrer yes # The Quiet option suppresses output messages... Useful when run # as a cron job to prevent bogus e-mails. Values can be either # "yes" or "no". Default is "no". Note: this does not suppress # warnings and errors (which are printed to stderr). Quiet yes # ReallyQuiet will supress all messages including errors and # warnings. Values can be 'yes' or 'no' with 'no' being the # default. If 'yes' is used here, it cannot be overriden from # the command line, so use with caution. A value of 'no' has # no effect. ReallyQuiet yes # TimeMe allows you to force the display of timing information # at the end of processing. A value of 'yes' will force the # timing information to be displayed. A value of 'no' has no # effect. TimeMe yes # GMTTime allows reports to show GMT (UTC) time instead of local # time. Default is to display the time the report was generated # in the timezone of the local machine, such as EDT or PST. This # keyword allows you to have times displayed in UTC instead. Use # only if you really have a good reason, since it will probably # screw up the reporting periods by however many hours your local # time zone is off of GMT. GMTTime no # Debug prints additional information for error messages. This # will cause webalizer to dump bad records/fields instead of just # telling you it found a bad one. As usual, the value can be # either "yes" or "no". The default is "no". It shouldn't be # needed unless you start getting a lot of Warning or Error # messages and want to see why. (Note: warning and error messages # are printed to stderr, not stdout like normal messages). Debug no # FoldSeqErr forces the Webalizer to ignore sequence errors. # This is useful for Netscape and other web servers that cache # the writing of log records and do not guarentee that they # will be in chronological order. The use of the FoldSeqErr # option will cause out of sequence log records to be treated # as if they had the same time stamp as the last valid record. # Default is to ignore out of sequence log records. The use # of this feature is strongly discouraged and rarely needed. # (the webalizer already compensates for up to 60 minutes of # difference between records). FoldSeqErr no # VisitTimeout allows you to set the default timeout for a visit # (sometimes called a 'session'). The default is 30 minutes, # which should be fine for most sites. # Visits are determined by looking at the time of the current # request, and the time of the last request from the site. If # the time difference is greater than the VisitTimeout value, it # is considered a new visit, and visit totals are incremented. # Value is the number of seconds to timeout (default=1800=30min) VisitTimeout 1800 # IgnoreHist shouldn't be used in a config file, but it is here # just because it might be usefull in certain situations. If the # history file is ignored, the main "index.html" file will only # report on the current log files contents. Usefull only when you # want to reproduce the reports from scratch. USE WITH CAUTION! # Valid values are "yes" or "no". Default is "no". IgnoreHist no # IgnoreState also shouldn't be used, but is here anyway. It is # similar to the IgnoreHist option, but for the incremental data # file. If this is set to 'yes', any existing incrememtal data # will be ignored and a new data file will be written at the end # of processing. USE WITH CAUTION. By ignoring an existing # incremental data file, all previous processing for the current # month will be lost, and those logs must be re-processed. # Valid values are "yes" or "no". Default is "no". IgnoreState no # CountryGraph allows the usage by country graph to be disabled. # Values can be 'yes' or 'no', default is 'yes'. CountryGraph yes # CountryFlags allows flags to be displayed in the top country # table in monthly reports. Values can be 'yes' or 'no', with # the default being 'no'. CountryFlags yes # FlagDir specifies the location of flag graphics which will be # used in the top country table. If not specified, the default # is to look in the 'flags' directory directly under the output # directory being used for the reports. If this option is used, # the display of flag graphics will be enabled by default. FlagDir flags # DailyGraph and DailyStats allows the daily statistics graph # and statistics table to be disabled (not displayed). Values # may be "yes" or "no". Default is "yes". DailyGraph yes DailyStats yes # HourlyGraph and HourlyStats allows the hourly statistics graph # and statistics table to be disabled (not displayed). Values # may be "yes" or "no". Default is "yes". HourlyGraph yes HourlyStats yes # GraphLegend allows the color coded legends to be turned on or off # in the graphs. The default is for them to be displayed. This only # toggles the color coded legends, the other legends are not changed. # If you think they are hideous and ugly, say 'no' here :) GraphLegend yes # GraphLines allows you to have index lines drawn behind the graphs. # I personally am not crazy about them, but a lot of people requested # them and they weren't a big deal to add. The number represents the # number of lines you want displayed. Default is 2, you can disable # the lines by using a value of zero ('0'). [max is 20] # Note, due to rounding errors, some values don't work quite right. # The lower the better, with 1,2,3,4,6 and 10 producing nice results. GraphLines 9 # IndexMonths defines the number of months to display in the main index # (yearly summary) table. Value can be between 12 and 120, with the # default being 12 months (1 year). IndexMonths 12 #IndexMonths 50 # YearHeaders enables/disables the display of year headers in the main # index (yearly summary) table. If enabled, year headers will be shown # when the table is displaying more than 16 months worth of data. Values # can be 'yes' or 'no', with 'yes' being the default. YearHeaders yes # YearTotals enables/disables the display of yearly totals in the main # index (yearly summary) table. If enabled, year totals will be shown # when the table is displaying more than 16 months worth of data. Values # can be 'yes' or 'no', with 'yes' being the default. YearTotals yes # GraphMonths defines the number of months to display in the main index # (yearly summary) graph. Value can be between 12 and 72 months, with # the default being 12 months. GraphMonths 12 # The "Top" options below define the number of entries for each table. # Defaults are Sites=30, URLs=30, Referrers=30 and Agents=15, and # Countries=30. TopKSites and TopKURLs (by KByte tables) both default # to 10, as do the top entry/exit tables (TopEntry/TopExit). The top # search strings and usernames default to 20. Tables may be disabled # by using zero (0) for the value. TopSites 25 TopKSites 25 TopURLs 25 TopKURLs 25 TopReferrers 30 TopAgents 30 TopCountries 50 TopEntry 25 TopExit 25 TopSearch 10 TopUsers 10 # The All* keywords allow the display of all URLs, Sites, Referrers # User Agents, Search Strings and Usernames. If enabled, a seperate # HTML page will be created, and a link will be added to the bottom # of the appropriate "Top" table. There are a couple of conditions # for this to occur.. First, there must be more items than will fit # in the "Top" table (otherwise it would just be duplicating what is # already displayed). Second, the listing will only show those items # that are normally visable, which means it will not show any hidden # items. Grouped entries will be listed first, followed by individual # items. The value for these keywords can be either 'yes' or 'no', # with the default being 'no'. Please be aware that these pages can # be quite large in size, particularly the sites page, and seperate # pages are generated for each month, which can consume quite a lot # of disk space depending on the traffic to your site. AllSites yes AllURLs yes AllReferrers yes AllAgents yes AllSearchStr yes AllUsers no # The Webalizer normally strips the string 'index.' off the end of # URLs in order to consolidate URL totals. For example, the URL # /somedir/index.html is turned into /somedir/ which is really the # same URL. This option allows you to specify additional strings # to treat in the same way. You don't need to specify 'index.' as # it is always scanned for by The Webalizer, this option is just to # specify _additional_ strings if needed. If you don't need any, # don't specify any as each string will be scanned for in EVERY # log record... A bunch of them will degrade performance. Also, # the string is scanned for anywhere in the URL, so a string of # 'home' would turn the URL /somedir/homepages/brad/home.html into # just /somedir/ which is probably not what was intended. #IndexAlias home.htm #IndexAlias homepage.htm # The DefaultIndex option is used to enable/disable the use of # "index." as the default index name to be stripped off the end of # a URL (as described above). Most sites will not need to use this # option, but some may, such as those whose default index file name # is different, or those that use "index.php" or similar URLs in a # dynamic environment. Values can be 'yes' or 'no', with the default # being 'yes'. This option does not effect any names added using the # IndexAlias option, and those names will still function as described # regardless of this setting. DefaultIndex yes # The Hide*, Group* and Ignore* and Include* keywords allow you to # change the way Sites, URLs, Referrers, User Agents and Usernames # are manipulated. The Ignore* keywords will cause The Webalizer to # completely ignore records as if they didn't exist (and thus not # counted in the main site totals). The Hide* keywords will prevent # things from being displayed in the 'Top' tables, but will still be # counted in the main totals. The Group* keywords allow grouping # similar objects as if they were one. Grouped records are displayed # in the 'Top' tables and can optionally be displayed in BOLD and/or # shaded. Groups cannot be hidden, and are not counted in the main # totals. The Group* options do not, by default, hide all the items # that it matches. If you want to hide the records that match (so just # the grouping record is displayed), follow with an identical Hide* # keyword with the same value. (see example below) In addition, # Group* keywords may have an optional label which will be displayed # instead of the keywords value. The label should be seperated from # the value by at least one 'white-space' character, such as a space # or tab. If the match string contains whitespace (spaces or tabs), # the string should be quoted with either single or double quotes. # # The value can have either a leading or trailing '*' wildcard # character. If no wildcard is found, a match can occur anywhere # in the string. Given a string "www.yourmama.com", the values "your", # "*mama.com" and "www.your*" will all match. # Your own site should be hidden HideSite localhost # Your own site gives most referrals #HideReferrer webalizer.org/ # This one hides non-referrers ("-" Direct requests) #HideReferrer Direct Request # Usually you want to hide these HideURL *.gif HideURL *.GIF HideURL *.jpg HideURL *.JPG HideURL *.jpeg HideURL *.JPEG HideURL *.png HideURL *.PNG HideURL *.bmp HideURL *.BMP HideURL *.ra # Hiding agents is kind of futile #HideAgent RealPlayer # You can also hide based on authenticated username HideUser root #HideUser admin # Grouping options GroupURL /yabbfiles/avatars/* Avatars GroupURL /yabbfiles/Smilies/* Smilies HideURL /yabbfiles/avatars/* HideURL /yabbfiles/Smilies/* GroupSite *.aol.com GroupSite *.compuserve.com GroupReferrer yahoo.com/ Yahoo! GroupReferrer yandex.ru/ Yandex GroupReferrer google.ru/ Google GroupReferrer excite.com/ Excite GroupReferrer infoseek.com/ InfoSeek GroupReferrer webcrawler.com/ WebCrawler GroupUser root wheel users GroupUser wheel wheel users # The following is a great way to get an overall total # for browsers, and not display all the detail records. # (You should use MangleAgent to refine further...) GroupAgent Yandex/1 Yandex HideAgent Yandex/1 GroupAgent Opera/10 Opera 10.x HideAgent Opera/10 GroupAgent Opera/9 Opera 9.x HideAgent Opera/9 GroupAgent Opera/8 Opera 8.x HideAgent Opera/8 GroupAgent Opera/7 Opera 7.x HideAgent Opera/7 GroupAgent "MSIE 8" Microsoft IE 8 HideAgent MSIE 8 GroupAgent "MSIE 7" Microsoft IE 7 HideAgent MSIE 7 GroupAgent "MSIE 6" Microsoft IE 6 HideAgent MSIE 6 GroupAgent "MSIE 5" Microsoft IE 5 HideAgent MSIE 5 GroupAgent "MSIE " Older Microsoft IEs HideAgent MSIE GroupAgent Firefox/3. Firefox 3.x HideAgent Firefox/3. GroupAgent Firefox/2. Firefox 2.x HideAgent Firefox/2. GroupAgent Firefox/1. Firefox 1.x HideAgent Firefox/1. GroupAgent Konqueror Konqueror HideAgent Konqueror GroupAgent Safari Safari HideAgent Safari GroupAgent Lynx* Lynx HideAgent Lynx* GroupAgent Wget/ WGet HideAgent Wget/ GroupAgent libwww-perl Perl HideAgent libwww-perl GroupAgent (compatible; Other Mozilla Compatibles HideAgent (compatible; GroupAgent Mozilla* Mozilla/Netscape HideAgent Mozilla* # HideAllSites allows forcing individual sites to be hidden in the # report. This is particularly useful when used in conjunction # with the "GroupDomain" feature, but could be useful in other # situations as well, such as when you only want to display grouped # sites (with the GroupSite keywords...). The value for this # keyword can be either 'yes' or 'no', with 'no' the default, # allowing individual sites to be displayed. HideAllSites no # The GroupDomains keyword allows you to group individual hostnames # into their respective domains. The value specifies the level of # grouping to perform, and can be thought of as 'the number of dots' # that will be displayed. For example, if a visiting host is named # cust1.tnt.mia.uu.net, a domain grouping of 1 will result in just # "uu.net" being displayed, while a 2 will result in "mia.uu.net". # The default value of zero disable this feature. Domains will only # be grouped if they do not match any existing "GroupSite" records, # which allows overriding this feature with your own if desired. #GroupDomains 0 # The GroupShading allows grouped rows to be shaded in the report. # Useful if you have lots of groups and individual records that # intermingle in the report, and you want to diferentiate the group # records a little more. Value can be 'yes' or 'no', with 'yes' # being the default. GroupShading yes # GroupHighlight allows the group record to be displayed in BOLD. # Can be either 'yes' or 'no' with the default 'yes'. GroupHighlight yes # The Ignore* keywords allow you to completely ignore log records based # on hostname, URL, user agent, referrer or username. I hesitated in # adding these, since the Webalizer was designed to generate _accurate_ # statistics about a web servers performance. By choosing to ignore # records, the accuracy of reports become skewed, negating why I wrote # this program in the first place. However, due to popular demand, here # they are. Use the same as the Hide* keywords, where the value can have # a leading or trailing wildcard '*'. Use at your own risk ;) Please # remember, the use of these will MAKE YOUR STATS INACCURATE and you # should consider using an equivalent 'Hide*' keyword instead. #IgnoreSite bad.site.net IgnoreURL *.sql IgnoreURL *.bak #IgnoreReferrer file:/* #IgnoreAgent RealPlayer #IgnoreUser root # The Include* keywords allow you to force the inclusion of log records # based on hostname, URL, user agent, referrer or username. They take # precidence over the Ignore* keywords. Note: Using Ignore/Include # combinations to selectivly process parts of a web site is _extremely # inefficent_!!! Avoid doing so if possible (ie: grep the records to a # seperate file if you really want that kind of report). # Example: Only show stats on Joe User's pages... #IgnoreURL * #IncludeURL ~joeuser* # Or based on an authenticated username #IgnoreUser * #IncludeUser someuser # The MangleAgents allows you to specify how much, if any, The Webalizer # should mangle user agent names. This allows several levels of detail # to be produced when reporting user agent statistics. There are six # levels that can be specified, which define different levels of detail # supression. Level 5 shows only the browser name (MSIE or Mozilla) # and the major version number. Level 4 adds the minor version number # (single decimal place). Level 3 displays the minor version to two # decimal places. Level 2 will add any sub-level designation (such # as Mozilla/3.01Gold or MSIE 3.0b). Level 1 will attempt to also add # the system type if it is specified. The default Level 0 displays the # full user agent field without modification and produces the greatest # amount of detail. User agent names that can't be mangled will be # left unmodified. MangleAgents 0 # The SearchEngine keywords allow specification of search engines and # their query strings on the URL. These are used to locate and report # what search strings are used to find your site. The first word is # a substring to match in the referrer field that identifies the search # engine, and the second is the URL variable used by that search engine # to define it's search terms. SearchEngine yandex.ru text= SearchEngine .google. q= SearchEngine yahoo.com p= SearchEngine altavista.com q= SearchEngine aolsearch. query= SearchEngine ask.co q= SearchEngine eureka.com q= SearchEngine lycos.com query= SearchEngine hotbot.com MT= SearchEngine msn.com q= SearchEngine infoseek.com qt= SearchEngine excite search= SearchEngine netscape.com query= SearchEngine mamma.com query= SearchEngine alltheweb.com q= SearchEngine northernlight.com qr= # Normally, search strings are converted to lower case in order to # increase accuracy. The SearchCaseI option allows them to maintain # case sensitivity, useful for some sites. The value can be 'yes' # or 'no', with 'yes' (case insensitive) being the default. SearchCaseI yes # The Dump* keywords allow the dumping of Sites, URLs, Referrers # User Agents, Usernames and Search strings to seperate tab delimited # text files, suitable for import into most database or spreadsheet # programs. # DumpPath specifies the path to dump the files. If not specified, # it will default to the current output directory. Do not use a # trailing slash ('/'). DumpPath /vhosts/forum.istorichka.ru/tmp # The DumpHeader keyword specifies if a header record should be # written to the file. A header record is the first record of the # file, and contains the labels for each field written. Normally, # files that are intended to be imported into a database system # will not need a header record, while spreadsheets usually do. # Value can be either 'yes' or 'no', with 'no' being the default. #DumpHeader no # DumpExtension allow you to specify the dump filename extension # to use. The default is "tab", but some programs are pickey about # the filenames they use, so you may change it here (for example, # some people may prefer to use "csv"). DumpExtension csv # These control the dumping of each individual table. The value # can be either 'yes' or 'no'.. the default is 'no'. DumpSites yes DumpURLs yes DumpReferrers yes DumpAgents yes DumpUsers yes DumpSearchStr yes # The custom graph colors are defined here. Declare them # in the standard hexadecimal way (as HTML, without the '#') # If none are given, you will get the standard default colors. ColorHit 00805c ColorFile 0040ff ColorSite ff8000 ColorKbyte ff0000 ColorPage 00e0ff ColorVisit ffff00 ColorMisc 00e0ff PieColor1 800080 PieColor2 80ffc0 PieColor3 ff00ff PieColor4 ffc080 # End of configuration file... Have a nice day!